After the LED light bar is turned on, part of the lamp bead is not bright, basically you can judge that the light bar bead is damaged. A damaged light bar bead is usually visible to the naked eye - a black spot on its surface indicates that it has been burned. Sometimes the light bar bead is first in series and then in parallel, so a light bar bead loss, will cause a light bar bead not bright. Or when the light bead flickers constantly, we can replace the led light bar.

LED headlight bulbs offer an improvement over their halogen counterparts. The most important of these is greater visibility. LED headlights are much brighter, revealing more of the road and your surroundings. This benefit also goes two ways, as oncoming traffic will have an easier time seeing your vehicle. And there are many types of LED headlight bulbs: fan headlight bulbs, fanless led headlights, truck headlight bulbs, projector led bulb, multi-color headlight bulbs, etc.

A car if you use a long time, led headlight bulb will be damaged and aging problems, lead to the lamp brightness dark or bright, many owners generally when encounter this problem to the local auto repair shops for led headlight bulb replacement, in fact, the car replacement bulb is easy, simple than your computer assembly, the replacement can be entirely your own.

If you want to disassemble the led light bar, you need to turn off the engine for more than 5 minutes, remove the key and wait for the engine to cool down completely, and then open the hood to avoid scalding yourself. After opening the engine compartment cover, you can see the dust cover behind the led light bar assembly. The dust cover is mostly made of rubber, which can be directly screwed down along the screw direction (some models can be directly pulled down). It doesn't take much effort. Then you can see the bulb base in the led light bar assembly. Hold the steel wire clip beside the base, and take out the bulb after the clip is released It's too late.

It's no secret how useful led light bar are. Led light bar don't keep clean all the time, and when we use tit for a long time, the lens of the light bar will appear blurred. In some cases, it may even develop a wax yellow color. This yellowish color is caused by calcium buildup on the lens due to continuous use of the light pole. While calcium buildup is nearly impossible to prevent, that doesn't necessarily mean you can't get rid of it. Simple cleaning can improve production efficiency and long-time use. These are the basic steps to effectively clean the led light bar.

Led headlight bulb mainly include: the fan led headlight bulb, the fanless led headlight bulb, the truck led headlight bulb, the projector led headlight bulb, the multi-color led headlight bulb, etc.