5 Ways to Choose a Work Light

Choosing additional lighting for your work vehicle will keep you safe, and it will make your ride more comfortable. If you are considering installing or replacing work lights, I can provide you with some methods for choosing the right work lights.

1. Select work lights according to the thickness and weight

The thickness and weight will affect the heat dissipation performance of the work light. The heat dissipation will affect the stability, safety and service life of the light. The thicker the light body, the better the heat dissipation performance. The heavier the weight of the light with the same volume, the greater the density and the better the heat dissipation.
If the heat dissipation is better, the safety of the lamp is higher and the service life is longer. For example, the three work lights in the picture belong to the same model and the same size. We can intuitively see the thickness of the lights. From the weight obtained by weighing, it is obvious that the third light has the best heat dissipation.

2. Select work lights according to beam patterns

The beam pattern is closely related to the light cup and chip. There are two types of light cups, namely and spotlight cups and floodlight cups. Spotlight cups can concentrate the light beam, irradiate farther, and The floodlight cup can make the irradiation area wider and the paving effect better. The quality of the chip will also have a great impact on the beam pattern. High-quality chips can make the irradiation distance longer, the irradiation range larger, and the paving effect better. Therefore, we need to choose work lights according to the application scenarios and your needs.

3.Select work lights according to the dustproof and waterproof value

When it needs to be used in extreme weather and environment, the selection of dustproof and waterproof value is especially important. The IP rating consists of two numbers. The first number represents the level of dustproof and foreign object intrusion prevention of the electrical appliance, and the second number indicates the degree of airtightness of the electrical appliance against moisture and water intrusion. The larger the number, the higher the protection level. The IP value of our work lights is generally IP67 and IP68, which means that the work lights can withstand many kinds of bad weather and working environment.

4.Choose work lights according to power

The unit of power is the watt. The calculation method is voltage times current. Theoretically speaking, the higher the wattage of the work light, that is, the greater the power, the higher the brightness. But in fact, the higher the wattage of the work light, the better. If the wattage is higher, the power will be greater and the working temperature will be higher, which requires better heat dissipation. 

5. Select work lights according to the material

  The material of the lights is very important. The quality of the material will affect the heat dissipation performance of the light. At present, our light body is generally made of die-casting aluminum alloy 6063. This material is oxidizable.It helps heat dissipation, reduces light decay, prolongs the service life of the light and is wear-resistant and shock-proof, suitable for long-term use. We generally use two types of masks, PMMA and PC, both of which can be used in mine or mountain lighting environments, PMMA material has better light transmission, and PC material is more wear-resistant. In addition, check if there is a breathing hole behind the light body. The function of the breathing hole is to dissipate heat and waterproof. If the work light has a breathing hole, it means that the light has a stronger waterproof function and heat dissipation function.

Now grandly launch our new product C950！What is special about this work light ? It is that it has obtained E-mark Certification. E-mark Certification is a certification system implemented by the Economic Commission of Europe for vehicles and parts products entering the market of member states. This certification is widely recognized around the world. Only the work lights that meet the performance requirements after rigorous testing can be sold legally in Europe. It can be said that with this certification, high quality and safety are guaranteed.

In addition, the light uses chips imported from Germany and a floodlight cup with a power of 27W, 2560LM, and the IP value is IP69K. It is made of die-cast aluminum alloy 6063, and there is a breathing hole behind the light body. According to these characteristics, it can be analyzed that this lamp is a high-quality work lamp that can be applied to various scene lighting. If you are interested in it, click https://www.jg-ledlight.com/4-Inch-Emark-Truck-Work-Light-Wholesale-C950-pd41 for more information!